MASSO
MASSO Documentation
4.2. MASSO Touch - Frequently asked questions
Can a normal MASSO-G3 controller be installed and used inside the MASSO
Touch model?
The MASSO Touch model has special electronics to drive and control the LED screen. The normal
MASSO-G3 model is designed to connect to VGA screens with a 15pin VGA connector and can't run
LED/LCD screens and can't be used with MASSO Touch.
Can the MASSO-G2 controller be installed and used inside the MASSO Touch
model?
No, the MASSO Touch model has special electronics to drive and control the LED screen. The
normal MASSO-G2 model is designed to connect to VGA screens with a 15pin VGA connector and
can't run LED/LCD screens.
NOTE: Even if a small add-on module to connect the VGA connector of the MASSO-G2 controller to
the MASSO Touch screen is made available, MASSO-G2 does not have the memory to add MASSO
Touch capacitive touch drivers or screen layouts to support full touch features.
What is the resolution of the screen?
The screen resolution is the same as of normal G2 and G3 models, 1024x768 pixels.
What material is the enclosure made of?
v5.18 - 08 Apr,2021
www.masso.com.au Page 19 of 477
To Next Page
Loading...
Need help?
General
