MASSO G2 User Manual

MASSO
MASSO Documentation
6.6.4. Feed rate Override
Feed rate Override
Feed rate override function allows the feed rate to be changed during machining. The range is from 20% to
100% of the specified feedrate and the current feedrate percentage is shown on the screen.
Information: This feature is available on the F2 & F3 Screens.
Information: Feed rate override ranges from 20% to 100% of the specified Feed rate. Feed rate
override cannot exceed 100%
How to use
Press the F11 Key on the keyboard
Use the + & - keys on your keyboard to to change the feedrate.
You can also use the Pendant to change the feedrate by rotating the MPG dial in either the + or -
direction to increase or decrease the feedrate.
Feed rate Override set at 44%
v5.18 - 08 Apr,2021
www.masso.com.au Page 94 of 477

MASSO G2 Specifications

General

Brand	MASSO
Model	G2
Category	Controller
Language	English