MASSO
MASSO Documentation
10.3. BobCAD-CAM
Masso Post Processors for Mill and Plasma
CLICK HERE to downloaded the latest Post Processor for Mill and Plasma direct from the Bobcam site.
Users will need a support account for the website. Masso posts can be found under Mill_Router and under
Plasma. MASSO Post Processor for Lathe
CLICK HERE to download the Lathe POST processor for BobCAD-CAM V29 (Released: 15/05/2018)
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
v5.18 - 08 Apr,2021
www.masso.com.au Page 264 of 477
To Next Page
Loading...
