MASSO G2 - M667 - Plasma - Turn THC Function on

MASSO
MASSO Documentation
9.21. M667 – Plasma – Turn THC Function On
This command is used to switched On the THC automatic Z axis control function in the plasma version.
Syntax & Parameters
M667
F Value (optional) - this is the feedrate of the Z axis that the will be used to move torch up/down
when in THC mode.
Example program
N10 M667 F50
The above program switches On the THC function and sets Z axis feedrate during THC control to 50.
v5.18 - 08 Apr,2021
www.masso.com.au Page 257 of 477