MASSO
MASSO Documentation
5.1. MASSO Touch
CAUTION: Semiconductor parts inside the unit can be damaged by electrostatic discharge (ESD).
When handling, care must be taken so that the devices are not damaged. Damage due to
inappropriate handling is not covered by the warranty.
Open the enclosure by removing the four marked M5 HEX bolts. Please fully remove the four bolts and the
swing open the top part towards the left side.
WARNING: When closing the enclosure and installing the M5 HEX bolts, please do not
overtighten.
v5.18 - 08 Apr,2021
www.masso.com.au Page 34 of 477
To Next Page
Loading...
