MASSO
MASSO Documentation
6.4.1. Graphical Interface Version 3
This page describes the User interface on MASSO G2 & G3 running
Version 3 software
The user interface is divided into 6 screens from F1 to F6, the below video explains each screen in detail.
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
INFORMATION: You can navigate between the screens by pressing keys F1 - F6 or by clicking
the buttons at the bottom of the screen.
F1 Screen
This screen allows you to configure your Masso settings.
When you enter this screen you will be prompted for the Admin Password. Default Password is
"HTG"
If you do not enter the password you will enter read only mode where you will not be able to make
changes. Use CTRL+L if you want to reenter the password.
v5.18 - 08 Apr,2021
www.masso.com.au Page 60 of 477
To Next Page
Loading...
