MASSO
MASSO Documentation
F2 Screen
This is the Run screen where you run your GCode files and monitor progress.
When you enter this screen you will be prompted for the User Password. Default Password is "HTG".
The user password can be changed or removed.
Use CTRL+L to lock the Screen and prevent unauthorized use.
The White box next to the Spindle CW is where you can enter your spindle speed. Type the desired
speed into the box and press enter.
Click on the WiFi symbol to enter the WiFi configuration page.
Click the Axis Zero buttons to zero out an Axis DRO
v5.18 - 08 Apr,2021
www.masso.com.au Page 61 of 477
To Next Page
Loading...
