MASSO
MASSO Documentation
11.5. Spindle VFD examples
MASSO supports 0~10v signal, clockwise and counter-clockwise signals to directly control VFD's.
INFORMATION: As VFD's have different control parameters, the VFD must be first properly
configured to take 0~10v control signals, the below video provides detailed steps on how to setup
and configure a VFD drive.
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
v5.18 - 08 Apr,2021
www.masso.com.au Page 304 of 477