MASSO
MASSO Documentation
7.1. Safe work practices when wiring MASSO
The purpose of this document is to provide information on good work practices while setting up and wiring
your MASSO. If you are unsure about the wiring of your machine especially mains voltage equipment, please
consult a certified service technician.
Install a Fuse
WARNING: The installation of a 1 amp fuse between your Power Supply and MASSO is required
to protect against an accidental short circuit of the auxiliary power connectors on MASSO, such an
event can damage the controller beyond repair.
v5.18 - 08 Apr,2021
www.masso.com.au Page 149 of 477
To Next Page
Loading...
