MASSO G2 User Manual

MASSO
MASSO Documentation
16.2.5. 4 Bit Digital Signal Output Turret
The 4 bit output type turret outputs the turret tool position in a 4 bit binary output as below:
Tool 0 signal - Binary 0001
Tool 1 signal - Binary 0010
Tool 2 signal - Binary 0011
Tool 3 signal - Binary 0100
and so on...
Setting up the tool changer
Go to F1-Setup screen and open Tool Changer window.
From the list select Press enter to open Tool Changer list and select the 4 Bit digital Signal Output
Turret from the list.
v5.18 - 08 Apr,2021
www.masso.com.au Page 433 of 477

MASSO G2 Specifications

General

Brand	MASSO
Model	G2
Category	Controller
Language	English