MASSO
MASSO Documentation
G00 A900 #Rapids the A axis to A900 (2.5 turns) G91 #Change to
Incremental mode G28 A0 #Moves Axis by 0 degrees then moves to A0 wit
hin one rotation G90 #Return to Absolute mode
In the above example if you specify another coordinate eg: G28 A360 it will move an additional 360
degrees taking the axis to A1260 (3.5 turns) then move to A0 in less than 1 rotation.
In this case it would be an additional 1/2 rotation to be back to home.
INFORMATION: If you do not change to incremental mode before the G28 A0 the axis will unwind
the full 2.5 revolutions to A0 and then move to the home position. In this case no further move is
needed.
v5.18 - 08 Apr,2021
www.masso.com.au Page 209 of 477
To Next Page
Loading...
Need help?
General
