MASSO
MASSO Documentation
Plasma - Plasma Arc OK Signal.
Plasma - Torch Breakaway Signal.
Jog/Rapid X+ & X- Inputs.
Jog/Rapid Y+ & Y- Inputs.
Jog/Rapid Z+ & Z- Inputs.
Jog/Rapid A+ & A- Inputs.
Jog/Rapid B+ & B- Inputs.
Jog/Rapid Mode Input.
Autoload G-Code (1, 2, 3, 4, 5, 6) Inputs.
Tool Changer - Inputs.
Auxiliary Input 1-6 (Toggle) Note: Input must be set high for 1 second to toggle the output
X, Y, Z, A, B Motor Alarm Input.
Lubricant Alarm Input.
Axis Motor Drive Alarm Input.
Spindle Drive Alarm Input.
Tool Setter Input.
Air Pressure Low Alarm Input.
Spindle Coolant Pulses Alarm
Spindle Coolant Flow Alarm Input.
Gcode Rewind Button Input.
v5.18 - 08 Apr,2021
www.masso.com.au Page 342 of 477
To Next Page
Loading...
