MASSO
MASSO Documentation
file button and all calibration and setup settings will be loaded from the MASSO_Settings.htg file and tool
table settings from the MASSO_Tools.htg file on the USB Flash drive.
CAUTION: Please restart MASSO after loading settings from USB Flash drive so that the settings
can take effect.
INFORMATION: Loading the tool table MASSO_Tools.htg is optional and does not need to be
present to load the settings.
How to Load and Save on MASSO G3
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
How to Load and Save on MASSO G2
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
v5.18 - 08 Apr,2021
www.masso.com.au Page 387 of 477
To Next Page
Loading...
