MASSO
MASSO Documentation
To be able to change tools easily, a tool change position can be set. This option is also helpful if your
machine bed is very large and you want the spindle moved to a certain location for easy tool change, for
example on the front of the machine every time a tool change is required.
Double click the 1: Manual Tool Change in the list and the below Tool change position window will open
where the the axis position for a tool change can be entered.
Setting tool change position
To be able to change tools easily, a tool change position can be set. This option is also helpful if your
machine bed is very large and you want the spindle moved to a certain location for easy tool change, for
example on the front of the machine every time a tool change is required.
Double click the 1: Manual Tool Change in the list and the below Tool change position window will open
where the the axis position for a tool change can be entered.
v5.18 - 08 Apr,2021
www.masso.com.au Page 403 of 477
To Next Page
Loading...
