MASSO
MASSO Documentation
F2 Screen
This is the Run screen where you run your GCode files and monitor progress.
When you enter this screen you will be prompted for the User Password. Default Password is "HTG".
The user password can be changed or removed.
Use CTRL+L to lock the Screen and prevent unauthorized use.
The empty box next to the Spindle CW is where you can enter your spindle speed. Type the desired
speed into the box and press enter.
Click on Wi-Fi at the top of the screen to enter the Wi-Fi configuration page. If Wi-Fi is Orange it is
connected.
Click the Axis Zero buttons to zero out an Axis DRO
Click on the DRO value to manually enter a new value
Click Optional Stop at the top of the screen to toggle between on and off.
v5.18 - 08 Apr,2021
www.masso.com.au Page 68 of 477
To Next Page
Loading...
