Mitsubishi GOT1000 Series User Manual

22 - 32
22.4 Temperature Controller Side Setting
22.4.1 Connecting to H-PCP-J
22.4 Temperature Controller Side Setting
RKC temperature controller
For details of RKC temperature controller, refer to the following manual.
User's Manual for the RKC temperature controller
22.4.1 Connecting to H-PCP-J
1 Communication settings
Make the communication settings of the temperature controller.
*1 Make the same setting as that of the GOT side.
*2 Select the unit address without overlapping with that of other units.
2 Settings by DIP switch
Make the settings of transmission speed, communication mode, data length, parity bit and stop bit.
Model name Reference
Temperature controller
H-PCP-J Section 22.4.1
H-PCP-A, H-PCP-B Section 22.4.2
Setting item
Setting range
Transmission speed
*1
9600bps, 19200bps, 38400bps
Communication mode MODBUS
Data length 8bits
Parity bit None
Stop bit 1bit
Unit address
*2
0 to F
COM.PORT1/COM.PORT2
setting switch(SW2)
COM.PORT3setting switch
(SW3)
COM.PORT3
COM.PORT1
COM.PORT2
1
ON
2345678 1
ON
2345678
Front
Right side

Mitsubishi GOT1000 Series Specifications

General

Power Supply	24 VDC
Type	HMI (Human Machine Interface)
Series	GOT1000
Resolution	640 x 480 pixels
Touch Panel Type	Resistive
Interface	RS-232, USB
Storage Temperature	-20 to 60°C
Protection Rating	IP65
Display Type	TFT LCD
Brightness	400 cd/m²
Backlight Life	50, 000 hours
CPU	RISC
Shock Resistance	147 m/s²
Display Size	10.4 inches