596
7 APPLICATION INSTRUCTION
7.19 Clock instruction
The time data A, B, and C are compared.
• The following table lists the comparison operation results between A, B, and C. Even when the data are compared under
the same conditions, the results differ depending on the comparison target data.
There is no operation error.
: Continuity, : Non-continuity
Comparison target data Condition
A<B B<C A<C
Second data
Minute data
Minute and second data
Hour data
Hour and second data
Hour and minute data
Hour, minute, and second data
None
BA C
14:08:5904:50:55 22:47:05
0:0018:0012:006:000:00
To Next Page
Loading...
