MUTOH ValueJet 1604 - Replacing MAIN Board

VJ-1604 Maintenance Manual 4 Parts Replacement
4-51 Rev.-05
(1) Replacing SODIMM
1. Open the board box 64.
"4.4.1 Opening Board Box 64" p.4-40
2. Open the lock to both sides.
3. Remove the SODIMM.
4. Replace the SODIMM.
Push in the SODIMM following the notches until click sound occurs.
5. To reassemble the unit, reverse the removal procedure.
(2) Replacing Main Board Assembly
1. Remove the board box 64.
"4.4.1 Opening Board Box 64" p.4-40
2. Remove the SODIMM.
"(1) Replacing SODIMM" p.4-50
No. Part name
1 SODIMM
2 Main board assembly
1
2