8 Maintenance VJ-1604 Maintenance Manual
Rev.-05 8-4
8.3 Part Life Information
This section shows how to check the life of the service parts.
To know the life of the service parts, check the maintenance counter from the counter display menu in the
maintenance mode.
"6.3.1 Counter Display Menu" p.6-4
Part life information of this printer is shown in the table below.
P_REAR sensor front
surface
Several times per
year
•Media dust
accumulation
• Foreign objects
Clean it.
Cleaner head
(Cleaning wiper)
Several times per
year
• Ink deposits
• Damages
Clean it.
Pressure roller Several times per
year
• Ink deposits
• Damages
Clean it.
Table 8-3 List of Parts Life Expectancy
Part Life expectancy Warning
display
How to
restore
Replacement
parts
References
Waste fluid tank Not counted
internally. Detected
at the float sensor
and a message is
displayed.
Waste fluid
box full
- Waste ink BOX
(Replaced by
user)
-
CR motor 4,600,000 passes Check Life
[CR motor]
Counter
clear
At the first
warning:
•CR motor
•CR Driven
pulley
(Check the ink
tube and the CR
cable.)
At the next
warning:
•CR cable
besides above
"4.7.2
Replacing CR
Motor
Assembly"
p.4-88
"4.7.6
Replacing CR
Driven
Pulley" p.4-97
"4.7.10
Replacing Ink
Tube" p.4-103
"4.7.8
Replacing
CR_FFC" p.4-
100
Table 8-2 Periodical Inspection Part List(Continued)
Part Timing Check point Action
To Next Page