5 Self-Diagnosis Mode VJ-1604　 Maintenance Manual
Rev.-05 5-52
5.11 Parameter Menu
In this menu, you can modify the set values of various adjustment items (adjustment parameters).
The parameter menu includes the following items.
5.11.1 Parameter Initialization Menu
This menu initializes the adjustment parameters. The parameters that can be initialized through this menu are
as follows.
• Uni-D / Bi-D parameter, wiper, CR motor, PF motor, pump)
Table 5-13 Diagnosis Items in Parameter Menu
Diagnosis item Contents Reference
Initialization Initializes the adjustment parameters. "5.11.1 Parameter
Initialization Menu"
p.5-52
Update Updates the adjustment parameters. "5.11.2 Parameter
Update Menu" p.5-55
[<] key
[<] key
[>] key
Parameter Initialization Menu
[Enter] key
[Cancel] key
Parameter Update Menu
[Enter] key
[Cancel] key
[>] key
[Enter]
To Next Page
Loading...
Need help?
General