MUTOH ValueJet 1604 - Replacing Roll Media Holder Assembly on the VJ16_R Side

4 Parts Replacement VJ-1604 Maintenance Manual
Rev.-05 4-152
The roll media holder assembly on the VJ16_L side is an integral part.
5. To reassemble the unit, reverse the removal procedure.
4.12.2 Replacing Roll Media Holder Assembly on the VJ16_R Side
• Follow the same procedures as for the replacement of the roll media holder assembly on the VJ16_L side.
"4.12.1 Replacing Roll Media Holder Assembly on the VJ16_L Side" p.4-149
• Pull out the roll media holder assembly on the VJ16_R side from the right side.