5 Self-Diagnosis Mode VJ-1604　 Maintenance Manual
Rev.-05 5-78
5.16 PaperInitial Menu
In this menu, you can set the media detection method in the self-diagnosis mode. The default value is the same
as the one in the normal operation mode.
Select either Top & Width / Width / Off. When Off is selected, you can set the media width in the media width
setting menu.
s
Table 5-28 Media Detection Item
Items Contents
Top & Width Normal media detection mode
Width Detects media width.
Off Does not detect media.
[-] key
[+] key
[+] key
[+] key
[-] key
[-] key
When Off is selected
Input media width
Press [Setting/value +] or [Setting/value -] key
to change the value
Range: 1000 to 1625 mm
[Enter]
To Next Page
Loading...
Need help?
General