1 Safety Instructions VJ-1604 Maintenance Manual
Rev.-05 1-4
Do not insert or drop metal objects or flammable objects inside the printer through
openings such as air holes. Doing so may cause electric shock or fires.
If foreign objects or fluids such as water enter the product internals, do not use the
unit as is. Doing so may cause electric shock or fires. Turn off the power supply
switch immediately, and disconnect the power plug from the power outlet.
Make sure to always use the provided power supply cable. If a power supply cable
other than the one supplied with the unit is used, it may cause electric shock or fires.
Always use the specified power supply (AC100V-120V or AC220V-240V). If a
power supply that is outside specifications is used, it may cause electric shock or
fires.
Supply power directly from a power supply outlet (AC100V-120V or AC 220V-
240V). Do not use extensions or splitters. Doing so may cause electric shock or
fires.
Always use the dedicated power plug with ground terminal, and make sure to
connect the ground to a ground line. If the ground line is not connected, it can cause
electric shock or fires.
Waste fluid produced from the printer corresponds to waste oil (waste ink) in
industrial waste (out of the 19 business related items). A proper waste fluid
processing is required by law based on the industrial waste processing law and
regulations of individual local governments. Please contract a waste fluid
processing company for disposal.
To Next Page