1 Safety Instructions VJ-1604 Maintenance Manual
Rev.-05 1-8
When performing cleaning, make sure to turn the power supply OFF, and pull out
the power supply plug from the power outlet.
Make sure that the product maintains a horizontal position when moving.
Before performing installation work for various options, make sure to perform the
following.
• Turn the power supply of the product OFF.
• Pull out the power supply plug from the power outlet.
• Disconnect cables connected to the product.
If work is performed with these connected, damage to the product or computer
may result.
• Touch the metallic sections of the product to remove any static electricity charged
in clothing or on one's body.
The electronic parts such as the memory, etc. are susceptible to damage by static
electricity.
When installing various options, make sure not to touch any elements on the
circuitboard. Elements on the circuitboard become very hot, and may cause burns.
To Next Page