MUTOH ValueJet 1604 - Page 244

5 Self-Diagnosis Mode VJ-1604 Maintenance Manual
Rev.-05 5-24
HeadWash 2 Cleans the tube heads using shipping fluid to maintain
the condition at the time of shipping.
"5.7.9 HeadWash
Menu 2" p.5-43
Software counter
initialization
Clears various software counters. "5.7.10 Software
Counter Initialization
Menu" p.5-44
Feed amount check Used to check the media feed amount per band. "5.7.11 Feed Pitch
Check Menu" p.5-45
Solid print check Performs solid nozzle print check (color selection, nozzle
selection and print direction selection are available).
"5.7.12 Solid Print
Menu" p.5-46
Table 5-5 Diagnosis Items in Adjustment Menu (Continued)
Diagnosis item Contents Reference
[<] key
[<] key
[>] key
[<] key
[<] key
[<] key
[>] key
[>] key
[>] key
[>] key
[<] key
[>] key
[<] key
[>] key
[>] key
[<] key
[<] key
[<] key
[>] key
[>] key
Nozzle Check Menu
Check Skew Menu
Head Slant Menu
Voltage Adjustment Menu
Uni-D/Bi-D Low Adjustment Menu
Side Margin Adjustment Menu
Software Counter Initialization Menu
Feed Pitch Check Menu
[<] key
[Enter] key
[Cancel] key
Uni-D/Bi-D High Adjustment Menu
Test Print Menu
Head Wash Menu
[>] key
Solid Print Menu
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[Cancel] key
[<] key
[>] key
[Enter]