MUTOH ValueJet 1604 - Page 249

VJ-1604 Maintenance Manual 5 Self-Diagnosis Mode
5-29 Rev.-05
3. Check the printed head slant check patterns. Checking items are as follows:
• Head slant
A: Check the slant at this point.
B: Media feed direction
C: OK
D: Move the head adjusting cam upward.
E: Move the head adjusting cam downward.
4. If any head slant is found, perform mechanical adjustment.
"7.8.1 Head Alignment (Horizontal Height)" p.7-35
B
A
C
E
D
20mm