MUTOH ValueJet 1604 - Page 261

VJ-1604 Maintenance Manual 5 Self-Diagnosis Mode
5-41 Rev.-05
5. Enter each measured value as the parameter.
(Input range: 0.0 to 20.0 mm (0.1 mm increments))
After printing
Press [Setting/value+] or [Setting/value-] key
to select initialize or check
Press [Cancel] key to go back to
Adj. 7 SideMargin Menu
Side Margin: 0.1㨙㨙 increments
Range: 0.0 - 20.0 mm
[Enter]
[Enter]
[Enter]
[Enter]