VJ-1604 Maintenance Manual 3 Specifications
3-3 Rev.-05
Command
MH-RTL (RTL-PASS)
Interface
Network Interface (Ethernet IEEE802.3)
Ink Supply method
Tube supply from four separate cartridges
Cartridge
Black, cyan, magenta, yellow: 220 ml ± 5 ml for each color
Environmental conditions Temperature Humidity
Operation environment
20ºC (68ºF) to 32ºC (89.6ºF) 40% to 60%, with no condensation
Plotting accuracy warranty range
22ºC (71.6ºF) to 30ºC (86ºF) 40% to 60%, with no condensation
Rate of change
2ºC/hour or less 5%/hour or less
Storage
environment
Without ink
-20ºC (-4ºF) to 60ºC (140ºF) 20% to 80%, with no condensation
With ink
-10ºC (14ºF) to 40ºC (104ºF) 20% to 80%, with no condensation
Power source Voltage
AC 90 - 132V
Frequency
50Hz / 60Hz ± 1Hz
Power
consumption
During Plotting
1200W (when heater is ON)
During standby
40W or less (when standby heater is OFF)
Outer dimensions Height
1262 mm (49.7 in.) * including dedicated stand
Width
2698 mm (106 in.)
Depth
845 mm (33.3 in.)
Weight
173 kg (380.6 lb.) * including dedicated stand
Item Specifications
To Next Page
Loading...
