VJ-1604 Maintenance Manual 3 Specifications
3-7 Rev.-05
• Avoid the following temperature and humidity conditions. Otherwise, Plotted images may appear
differently from what you expect.
• Places where sudden changes in temperature and humidity are expected, even though the
condition is within the range specified
• Places where direct sunlight or excessive lighting are expected
• Places where air conditioners blow directly
• MUTOH recommends that the printer should be installed where air conditioning can be adjusted
easily.
(2) Required Space
Install the printer on a flat surface that fulfills the following conditions.
• The place to install printer with the dedicated stand should have enough loading capacity.
For the printer and the dedicated stand, refer to"3.2 Product Specifications" p.3-2.
* Do not use VJ-1604 without stand.
e
a
d
b
c
a= 600 mm
b=1000 mm
c=1000 mm
d=1000 mm
e=1550 mm
To Next Page
Loading...
