MUTOH ValueJet 1604 - 4.5 Replacing Board Base Section (Y Rail Section); 4.5.1 Replacing Heater Junction Board Assembly; 4.6 Replacing X Rail Section; 4.6.1 Replacing PF Speed Reduction Belt

VJ-1604 Maintenance Manual 4 Parts Replacement
4-3 Rev.-05
4.6.7 Replacing Heater, Thermistor...................................................... 4-69
4.6.8 Replacing Suction Fan................................................................. 4-77
4.6.9 Replacing Platen Non-Reflective Tape........................................ 4-79
4.6.10 Replacing Media Holder............................................................... 4-79
4.6.11 Replacing Flushing Tray .............................................................. 4-81
4.6.12 Replacing Flushing Absorber....................................................... 4-83
4.7 Replacing Y Rail Section...................................................................... 4- 85
4.7.1 Replacing Steel Belt..................................................................... 4-85
4.7.2 Replacing CR Motor Assembly.................................................... 4-88
4.7.3 Replacing CR Drive Pulley Assembly.......................................... 4-90
4.7.4 Replacing T Fence....................................................................... 4-92
4.7.5 Replacing CR Origin Sensor........................................................ 4-95
4.7.6 Replacing CR Driven Pulley......................................................... 4-97
4.7.7 Replacing Steel Bearer................................................................ 4-98
4.7.8 Replacing CR_FFC.................................................................... 4-100
4.7.9 Replacing Pressure Roller ......................................................... 4-102
4.7.10 Replacing Ink Tube.................................................................... 4-103
4.8 Replacing Cursor Section.................................................................. 4- 106
4.8.1 Releasing Head Lock................................................................. 4-106
4.8.2 Removing CR Board Cover ....................................................... 4-107
4.8.3 Replacing CR Board Assembly.................................................. 4-107
4.8.4 Replacing CR Encoder Assembly.............................................. 4-109
4.8.5 Replacing PG Origin Sensor Assembly..................................... 4-110
4.8.6 Replacing Cursor Roller Arm Assembly..................................... 4-111