DescriptionSetting
Fill in the number that replace the # hashes in the name.
The number increases after each scan.
'Start value for ### in
the scan file name'
Fill in the scan filename used for scans to the Smart Inbox.
When the scan filename contains one or more #, the hashes
are replaced by ascending numbers.
'File name for scan to
Smart Inbox'
Enable to print a checkprint of the scan.'Check print'
Note:
The file extensions that are defined in the 'Scan job defaults' cannot be changed via the
'Smart Inbox'.
Chapter 3 - Define your Workflow with Océ Express WebTools106
Set the scan job default settings