Océ PlotWave 340 User Manual

Print the print density chart
When to do
To influence the toner usage of your printer, you can print the print density chart and
adjust the print density offset. A negative value reduces the toner usage, a positive value
increases the toner usage.
Print the print density chart
On the multi-touch user panel:
1.
Tap the 'System' thumbnail. A window opens.
2.
In the 'Setup' list in the bottom right corner of the display, select 'Test prints'. A wizard
opens.
3.
Select 'Print density chart'.
4.
Tap OK.
Result
A 'Print density chart' is printed.
Use the chart to change the print density in Océ Express WebTools or via 'All settings'
on the user panel.
Chapter 8 - Support 369
Print the print density chart
Operating Information: PlotWave (PW) 340, PW350 - Edition 2013-06

Océ PlotWave 340 Specifications

General

Brand	Océ
Model	PlotWave 340
Category	All in One Printer
Language	English