FunctionComponent
The button that allows the operator to do the following:
•
Get the printer out of sleep mode.
•
Wake the printer up to full functionality.
2. wake-up button
You can insert a USB mass storage device to:
•
Print a file directly from the USB mass storage device.
•
Scan an original and save it directly on the USB device.
The green light that illuminates the port starts to blink during
data transfer.
3. USB port
The button with a red light that allows the operator to do the
following:
•
Immediately interrupt a scan job.
•
Stop a print job after the page that is being printed.
4. stop button
The button that allows the operator to do the following:
•
Return to the home screen on the user panel display.
•
Reset settings to default by pressing the button twice.
5. home button
Dynamic tile on the user panel display that allows the operator
to do the following:
•
Start a scan job, a print job or a copy job on the user panel.
6. green button
(touch)
Chapter 2 - Get to Know the Printing System42
Introduction to Océ ClearConnect
To Next Page
Loading...
Need help?
General