How to auto-feed an original
Introduction
When you activate the auto-feed functionality, you do not need to use the green button
every time you scan a document. This way, you improve your productivity. The scanner
is activated automatically and releases the original after the scan procedure.
Note:
The auto-feed functionality is disabled when you select the 'Print' tile or when the user
panel reverts to the home screen after the specified timeout period.
Note:
You can change the settings of your copy or scan job before you feed the originals.
How to auto-feed the original
1.
Feed the first original face up and centered on the original feeding table.
2.
The scanner takes the original.
3.
Tap the green button twice. The green button displays the message 'Automatic'.
4.
Tap the green button to start the scan job.
5.
When the user panel displays the message 'Insert original', you can insert the next original.
6.
If you want to deactivate the auto-feed functionality, tap the green button. 'Automatic'
disappears from the green button.
Chapter 4 - Use the Printing System190
How to auto-feed an original
To Next Page
Loading...