Optimize your Print Quality and Print
Productivity
Set the 'PDF transparency flattening'
Introduction
In Océ Express WebTools, you can select a setting to flatten transparency information
in a PDF document before printing. The setting is used for PDF documents containing
transparency information only.
You can choose between the following values:
•
'Quality'
Select this value if print quality is an important factor. The processing speed slows
down and more memory is required.
•
'Speed'
Select this value if PDF processing performance is more important than print quality.
Large and complex PDF files are processed faster and use less memory.
Before you begin
For this procedure, you need to log in as a Key Operator.
How to set the 'PDF transparency flattening'
In Océ Express WebTools:
1.
Open the 'Preferences' - 'Print job defaults' tab.
2.
Click on 'Edit' in the 'Postscript/PDF rasterization settings' section or click on the 'PDF
transparency flattening' setting.
3.
Select 'Quality' or 'Speed'.
4.
Click 'Ok' to confirm or 'Cancel' to reject your entries.
Chapter 3 - Define your Workflow with Océ Express WebTools 177
Set the 'PDF transparency flattening'
To Next Page
Loading...
Need help?
General