Basic Copy Jobs - Default
Advised settings for copy jobs
Introduction
A default copy job takes two steps: feed the original face up and tap the green button.
When you change the presets or the advanced settings, it is an extended copy job.
Recommended settings for copy jobs
It is best to predefine the advised settings for copy jobs you do most often.
The advised settings for specific copy jobs are found in the table below. In most cases,
the advised settings give the best results.
#
RemarksOriginal typeOriginal document
'Lines/text standard' or
'Folded lines/text'.
Monochrome CAD
Drawings
For folded monochrome
originals, apply 'Folded
lines/text'.
'Colored original'Folded colored CAD
drawing
The 'Colored original'
mode converts all colors,
even weak ones, to
grayscale.
'Colored original'Colored original, like
CADcolor, maps, business
graphics, etc.
'Colored original'CAD drawings with marks
from marker pens
'Photo'Photos and high-defini-
tion color prints
'Colored original';Medium quality color
prints
The renewed 'Dark origi-
nal' setting is best for all
CAD originals with vary-
ing background.
'Dark original'Dark originals and dark
transparent originals
'Dark original'Diazo copies / "Chinese
blueprints"
Chapter 4 - Use the Printing System 223
Advised settings for copy jobs
To Next Page
Loading...
Need help?
General