Scan CAD color to 'TIFF' format
Introduction
When you want to scan a CAD colour to 'TIFF' format, you can select the presets on
the user panel.
1.
Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
2.
Tap the 'Scan' tile on the user panel and select your preferred location in the scan Smart
Access.
Note:
When you do not select a location, the file is sent to the public Smart Inbox.
3.
Tap the 'Scan' tile again. A window with a list of presets opens.
4.
Tap the 'File type' preset.
5.
Select'TIFF'.
6.
Tap the 'Image' preset.
7.
Select CAD colour.
8.
Tap the green button.
Chapter 4 - Use the Printing System258
Scan CAD color to 'TIFF' format
To Next Page
Loading...
Need help?
General