Enable or disable USB
Introduction
If you want to use USB as a location, you have to make settings for USB first. You can
make the settings in Océ Express WebTools.
Illustration
Make settings for USB
Open the 'Configuration' - 'External locations' tab. USB is present in the list of external
locations.
1.
Select 'USB', and click on the "Edit" icon under "Actions". A window opens.
2.
You can change the 'Name' recognizable for the user. This name appears on the user
panel.
Note:
It is advisable to leave USB in the name for best recognition.
3.
You can change the 'Description'.
4.
Under "enabled functionalities", you can choose the functionalities you want to use for
USB.
Choose 'Print from and scan to' if you want to enable print and scan from and to USB.
Choose 'Print from only' if you want to enable print from USB only.
Choose 'Scan to only' if you want to enable scan to USB only.
Choose 'None' if you want to disable the USB functionality.
5.
Enter the 'File name'. If you enter a generic name, for example "scan###.*", the file gets
a unique file name. An ascending number replaces the ###.
6.
Click 'Ok' to save the settings for USB as an external location.
Chapter 3 - Define your Workflow with Océ Express WebTools154
Enable or disable USB
To Next Page
Loading...
Need help?
General