Océ PlotWave 340 - Load a Media Roll (Position

7.
Use both hands to slide the media under the metal paper guide (2) until the media is
transported automatically.
2
8.
If necessary, press the clean cut button to trim a strip of the new media roll. Press once
for a strip of approximately 20 cm (7.9 in) or hold the button and release it when the
strip has the desired length.
9.
Close the media drawer.
Chapter 5 - Maintain the Printing System 313
Load a media roll (position 2)
Operating Information: PlotWave (PW) 340, PW350 - Edition 2013-06