Preset category:'Layout'
#
FunctionSettings valuesPreset
When set to 'Synchro', the print is cut
depended of the image.
When set to 'Standard', the print is cut
to a standard media size.
When set to 'Custom', you must enter
the sizes manually.
'Cut method':
•
'Synchro'
•
'Standard'
•
'Custom'
'Cut size'
Adds a blank strip at the beginning of the
output.
From 0 to 400 mm or 0 to 16".
'Add a leading strip'
Adds a blank strip at the end of the out-
put.
From 0 to 400 mm or 0 to 16".
'Add a trailing strip'
Chapter 4 - Use the Printing System 231
Advanced settings for copy jobs
To Next Page
Loading...