FunctionSettings valuesSettings val-
ues
Preset
'The horizontal offset where the
erase area starts.'
From 0 to 914 mm
or 0 to 36".
'Area to erase:
X origin'
'Area to
erase'
'The vertical offset where the
erase area starts.'
From 0 to 6000
mm or 0 to 250".
'Area to erase:
Y origin'
'The width of the area to erase.'From 0 to 914 mm
or 0 to 36".
'Area to erase:
width'
'The length of the area to erase.'From 0 to 6000
mm or 0 to 250".
'Area to erase:
length'
Chapter 4 - Use the Printing System238
Advanced settings for copy jobs
To Next Page
Loading...