Transducer Receptacles and Cable Management
The system includes three receptacles for array transducers and one receptacle
for a pulsed- or continuous-wave Doppler probe. All four receptacles can be
occupied at the same time, but only one transducer can be active at a time.
When a transducer is not in use, store it in one of the transducer holders on
the control module.
When a transducer is not in use, store it in one of the transducer holders on
the control module. Always use the cable management system to prevent cables
from being stepped on or run over by the cart wheels.
101
iU22 User Manual
4535 614 45861
3
System Overview
To Next Page
Loading...