DescriptionIcon
Indicates the basic feature status of the voice control option:
• Large X: Off
• No change (as shown): On
• Key overlay: On, with the keyword feature on
• ABC overlay: On, with the voice annotation feature on
Indicates the headset status of the voice control option:
• Yellow on black: Not ready, not connected, out of range
• Gray on black (as shown): Ready and listening
• Black on yellow: Did not recognize, did not execute
• Black on green: Heard and executed
Indicates, when displayed, that the microphone is enabled. When the
icon is not displayed, the microphone is disabled.
Voice Control
Voice control uses a wireless headset to send your voice commands to the
system. You can use voice control to operate the system when the control panel
is out of reach or you need both hands for scanning. You can also use voice
control to add text annotation to images. When this feature is active, you can
still use the controls on the control panel.
The voice control option can recognize commands in English, French, Italian,
German, and Spanish.
Using voice control, you can operate the system controls that are most commonly
used during an exam. For knobs and some controls on the touch screens, you
can direct the system to adjust the control up or down. You can include a relative
control setting, which specifies an increment or multiplier, depending on the
command you use it with. For example, "2D gain up 5" corresponds to an increase
141
iU22 User Manual
4535 614 45861
5
Using the System
To Next Page
Loading...