Positioning the Control Module
You can adjust the position of the control module vertically and side-to-side. In
addition, you can also swivel the control module. For information on locking the
control module, refer to "Moving the System" on page 116.
Do any of the following to position the control module:
• To move the control module up or down, squeeze the release lever on the
front handle and use the handles to position the module.
• To swivel the control module, release the module by turning the locking lever
to the left, then twist the module while gripping it by the sides.
• To move the control module side-to-side, release the module by turning the
locking lever to the left, then slide it while gripping it by the sides.
Using the Retractable Keyboard
Beneath the control panel is a retractable keyboard. You can use the keyboard
to enter patient data, exam comments, image annotation, and your logon
password. The keyboard also includes function keys that access various features,
such as setups and Help.
1. Pull out the keyboard. The keyboard illuminates after you pull it out
completely.
2. Push the keyboard in completely when you are finished.
Touch Screen Brightness Controls
The touch screen brightness control is behind the touch screen at the top. Use
it to adjust the brightness of the touch screen display when you need to
compensate for changes in ambient light.
iU22 User Manual
134
4535 614 45861
Using the System
5
To Next Page
Loading...