Warning Symbols
The system may use the following warning symbols. For additional symbols used
on the system, see the "Safety" section.
DescriptionSymbol
Identifies a safety note.
May also indicate that there is an impending loss of data that must be
acknowledged.
Warning: Indicates that there is a possibility of a system malfunction
that might prevent the use of the ultrasound system.
Dangerous voltages: Appears adjacent to high-voltage terminals,
indicating the presence of voltages greater than 1,000 Vac (600 Vac in
the United States).
Identifies ESD (electrostatic-discharge) sensitivity of a connector that
is not tested as specified in IEC 60601-1-2. Do not touch exposed
connector pins. Touching exposed pins can cause electrostatic
discharge, which can damage the product.
Indicates that the user should see the instructions for use for safety
information.
iU22 User Manual
18
4535 614 45861
Read This First
1
To Next Page
Loading...