Loading and Ejecting a Disc
Do one of the following:
• To open the drive tray, press the Eject button on the drive.
• To load a disc, gently guide a disc into the drive slot until the disc is pulled
into the drive.
• To close the drive tray, press the Eject button on the drive or gently push
the tray in until it closes.
Erasing a DVD
Erasing a rewriteable disc (DVD+RW, DVD-RW, or CD-RW) erases all of the
data on it and prepares it for reuse. After a disc is erased, the entire capacity of
the disc is once again available. You can also erase a write-once disc (DVD+R,
DVD-R, or CD-R) , but you will not be able to write files to the erased portion
of the disc.
1. Display the Patient Directory by pressing Review, and if necessary, clicking
Patient Directory in the Review display.
2. Load a disc into the drive.
3. In the Patient Directory, click Erase.
4. In the Erase Disc dialog box, click OK to erase the disc.
5. When the dialog box indicates that erasing is complete, click OK.
NOTE
If you receive an error message when exporting data to a DVD or when
viewing exam data on a DVD, you may need to eject the DVD from the drive
and re-insert it.
iU22 User Manual
168
4535 614 45861
Using the System
5
To Next Page
Loading...
