d. Click Done.
Copying Quick Save Presets to Removable Media
You can copy Quick Save presets to a DVD or a USB storage device. This
function is useful for archiving presets and for sharing presets among other iU22
systems.
NOTES
• When you load setups into the system from removable media, the contents
of the source storage media are displayed; however, you cannot select
specific items to load. When you load setups from removable media, all
setups on that storage media are loaded onto the system. To load specific
setups, copy only the required setups to removable media and then load
them to the new location.
• If you receive an error message when exporting data to a DVD or when
viewing exam data on a DVD, you may need to eject the DVD from the
drive and re-insert it.
1. If a preset you want to copy is active, deactivate it by pressing Transducer,
and then selecting the associated transducer and a different preset.
2. Press the Setup key.
3. In the setups, click Service, and then click System Management.
4. Click Backup/Restore.
5. Select presets to copy by doing one of the following:
• To select all presets, click Presets.
• To select specific Quick Save presets, expand the Presets list, and then
select the presets you want to copy.
6. From the Select the Media menu, select the media type that you want to
use.
7. Click Backup.
iU22 User Manual
174
4535 614 45861
Customizing the System
6
To Next Page
Loading...