Features of the 3D9-3v Transducer
A curved array transducer with a 130-degree field of view that
supports: high-resolution 2D imaging; high-resolution quantitative,
single-sweep 3D volume acquisition; and 4D imaging up to 22
volumes per second for endovaginal obstetrical and gynecological
applications.
Features
Operating range: 3 to 9 MHzFrequency
2D image plane: 130 degreesSector angle
YesBiopsy
capable?
Length (transducer and cable): approximately 2.38 m (7.8 ft)
Length (handle to tip): 30 cm (12 in)
Radius of curvature: 11.5 mm (0.45 in)
Specifications
Patient-Contact Parts
Latex is commonly used in transducer covers marketed to help with infection
control in transesophageal, endocavity, and intraoperative imaging applications
and during biopsies. Examine the packaging to confirm latex content. Studies
have shown that patients can experience allergic reactions with natural rubber
latex. See the "FDA Medical Alert on Latex" on page 45.
NOTE
The ultrasound system and transducers discussed here do not contain natural
rubber latex that contacts humans. Natural rubber latex is not used on any Philips
ultrasound transducers.
iU22 User Manual
272
4535 614 45861
Endocavity Transducers
11
To Next Page
Loading...