6. Lock the monitor arm by pressing the articulating portions of the arm together.
7. Release the wheel brakes and set the steering locks by using the appropriate
step:
• On a one-pedal system, lift the foot pedal up fully.
• On a two-pedal system, press the right foot pedal down fully.
WARNING
Do not move the system with the steering locked and wheels pointing in the
direction you are moving the system. To avoid system instability while moving
it, engage the steering lock only after you have moved the system a short
distance in the intended direction. This means that when you push the system
by using the front handles, the wheels are locked under the system, not
protruding out from under the back of the system.
8. Move the cart using the front handles.
Positioning in Conned Spaces
Follow this procedure when positioning the system in a confined space.
1. Release the steering locks and wheel brakes by using the appropriate step:
• On a one-pedal system, press the pedal to its middle position.
• On a two-pedal system, Press the right foot pedal halfway down.
2. Move the system in any direction using the front handle.
3. When the system is in position, set the wheel brakes by using the appropriate
step:
• On a one-pedal system, press the foot pedal down fully.
• On a two-pedal system, press the left foot pedal down fully.
119
iU22 User Manual
4535 614 45861
4
Preparing the System