4. On the Voice Profiles tab, select the profile you want to train.
5. Click Training.
6. In the Training Topics dialog box, select a book you would like to read to
train voice control. Click OK.
7. Click Microphone and begin reading the text. Ignore text color for now and
continue reading to the end of the displayed text. If all text is recognized, the
next page of text is displayed.
8. Any text not recognized is marked in red. When you have finished reading
and the text background changes to yellow, do one of the following:
• To reread the entire page, click Repeat and begin reading.
• To reread starting at the first unrecognized text, drag the text cursor to
the beginning of the first red text. Then click Microphone and read from
that point to the end of the page.
NOTE
If some text is still unrecognized after rereading it, click Next to display
the next page.
Read at least until the prompt indicates that you have reached minimal training
(2 minutes or more). To improve recognition accuracy, read further. If you
need to stop the training temporarily before you are finished, click Suspend.
When you resume training, the last uncompleted page will be displayed.
9. When you are finished reading, click Start Processing to apply the training
to your profile.
NOTE
If Start Processing is not available, first click Microphone.
10. Click Done when the processing is complete.
iU22 User Manual
150
4535 614 45861
Using the System
5
To Next Page
Loading...